1. Emere site na nchara dị elu nke nwere zinc plating maka oke ogologo oge na nguzogide corrosion.
2. Cr (VI) - ihe n'efu na-eme ka ihe dabara adaba na gburugburu ebe obibi ma dị mma maka iji ya mee ihe n'ọtụtụ ngwa.
3. Nhazi siri ike na-enye njikọ dị nchebe na nke na-ekpuchi maka usoro hydraulic gị, na-eme ka arụmọrụ zuru oke na ntụkwasị obi dịkwuo elu.
4. Igwe cone 24 ° na-enye kọntaktị elu kachasị mma, na-eme ka ike na ịdịte aka nke njikọ ahụ dịkwuo elu.
5. Enwere ike itinye ya site na ịpịnye ya na njedebe nke hydraulic gị ma chekwaa ya na ihe mgbochi ma ọ bụ crimping.
| Akụkụ NO. | Eriri | HOSE ID | A | H | B | |||
| mm | inch | inch | mm | mm | inch | mm | ||
| S1D273-20-12 | 20 | M30x2 | 3/4 | 3.31 | 84 | 30 | 1.42 | 36 |
| S1D273-25-12 | 25 | M36 x2 | 3/4 | 3.39 | 86 | 36 | 1.5 | 38 |
| S1D273-30-16 | 30 | M42x2 | 1 | 3.7 | 94 | 46 | 1.73 | 44 |
| S1D273-30-16 | 16 | M52x2 | 1-1/4 | 4.41 | 112 | 55 | 1.89 | 48 |
Mee ka arụmọrụ na ntụkwasị obi nke sistemu hydraulic gị dịkwuo elu site na oke mma anyị nwoke Metric S - Rigid - (24° Cone) Hydraulic Fitting.Emebere ya site na nchara dị elu nwere platin zinc, dabara adaba na-ekwe nkwa ịdịte aka kacha elu yana nguzogide corrosion pụrụiche.
Anyị na-ebute nchekwa gburugburu ebe obibi ụzọ, nke bụ ya mere eji eme hydraulic anyị site na Cr (VI) - ihe efu.Nke a na-eme ka o doo anya na ọ dị mma na gburugburu ebe obibi ma dị mma maka iji ya mee ihe n'ọtụtụ ngwa ngwa na-enweghị imebi arụmọrụ.
N'igosipụta atụmatụ siri ike, ihe dabara adaba nke hydraulic a na-enye njikọ echekwabara na mgbakasị maka sistemu hydraulic gị.Kwuo nke ọma maka ntapu nwere ike ime ma nwee ọmarịcha sistemụ arụmọrụ site na iji dabara adaba a pụrụ ịdabere na ya.
Oghere cone 24° nke dabara adaba na-enye kọntaktị elu kachasị mma, na-ebute ike na ịdịte aka nke njikọ ahụ.Ị nwere ike ịtụkwasị obi na nke a dabara adaba ga-eguzogide nrụgide dị elu na ọnọdụ ndị na-achọsi ike, na-ejigide njikọ siri ike na ntụkwasị obi.
Nwụnye bụ ikuku.Naanị slide nwoke Metric S - Rigid - (24° Cone) Hydraulic Fitting na njedebe nke eriri hydraulic gị wee chekwaa ya site na iji mwekota ma ọ bụ ngwa mkpọ.Ọ dị mfe otú ahụ!
Tụkwasa obi na nka anyị na Sannke, ụlọ ọrụ hydraulic kacha mma maka ngwaahịa dị elu na ntụkwasị obi.Maka ajụjụ ndị ọzọ ma ọ bụ ịnye iwu, biko egbula oge ịkpọtụrụ anyị.Kwalite sistemu hydraulic gị taa na Male Metric S – Rigid – (24° Cone) Hydraulic Fitting!
